Kenwood KA-9100 Value & Price History
As of 2026-09-21, a Kenwood KA-9100 has a market value at around $33; restored examples average $2,350, parts units around $45. Based on 33 estimated sales.
Is a parts unit worth buying?
The $45 parts price is $160 less than the $205 working asking price — a 78% gap. Whether that gap covers the cost of repair depends on what's wrong.
What "for parts" usually means for a amplifier: Integrated amplifiers listed for parts commonly have one dead channel, blown output stage, or failed power supply caps. Sometimes it's as simple as a bad speaker relay.
When it pencils out: Output stage repair runs $100–300 depending on whether replacements for the output transistors exist. A full service is $200–400. The $160 gap here is tight — only pursue if you have a specific diagnosis and repair quote in hand.
When to walk away: An amp with a blown transformer or no available output transistor replacements is a parts donor, not a restoration candidate. Ask the seller what failed and whether any repair was attempted.
DIY vs shop: Speaker relay cleaning and fuse replacement are accessible DIY tasks. Anything touching the output stage needs a proper bench setup. Full repair cost context: what vintage stereo repair actually costs.
Price history
Asking median is down 73% over the last 45 days ($753 → $205).
View as table
| Date | Asking | Restored | Sold |
|---|---|---|---|
| 2026-08-08 | $753 | $2,350 | — |
| 2026-08-25 | $205 | — | — |
| 2026-08-28 | $552 | $2,350 | — |
| 2026-08-31 | $552 | $2,350 | $35 |
| 2026-09-03 | $552 | $2,350 | $34 |
| 2026-09-06 | $552 | $1,875 | $34 |
| 2026-09-09 | $205 | $1,875 | $35 |
| 2026-09-12 | $205 | $1,875 | $35 |
| 2026-09-15 | $205 | $2,350 | $33 |
| 2026-09-18 | $205 | $2,350 | $33 |
| 2026-09-21 | $205 | $2,350 | $33 |
Daily trimmed medians from qualifying eBay listings; days without a fresh sync are not plotted.
Specifications
| Years produced | 1977–1979 |
| Power output | 90 wpc (8 ohms) |
| Type | Amplifier |
| Brand | Kenwood |
| Original MSRP | 600 (1977) |
| Inflation-adjusted | ~$3,050 today |
| Market value (sold) | $33 |
| Currently listed (asking) | $205 |
| Restored value | $2,350 |
| Value vs MSRP | -66% |
Buying notes
90-watt Kenwood integrated amplifier. DC-coupled design; always check DC offset before connecting speakers. Recap $250-380. Good build quality. Check both channels and verify the protection relay clicks cleanly when powering on.
Parts & supplies
Common maintenance items for the Kenwood KA-9100. eBay links are model-specific searches; Amazon links are for generic supplies that work across most equipment.
- Kenwood KA-9100 capacitor recap kit on eBay →
- Kenwood KA-9100 replacement knobs on eBay →
- Fuses for the Kenwood KA-9100 on eBay →
- DeoxIT D5 — cleans oxidized contacts, quiets scratchy pots on Amazon →
- Multimeter — check DC offset before connecting speakers on Amazon →
- Speaker wire on Amazon →
Purchases through these links may earn StereoWorth a small commission at no extra cost to you. See our affiliate disclosure. Repair budgeting: what vintage stereo repair actually costs.
Comparable models
- Kenwood KA-8004 $20
- Kenwood KA-7300 $385
- Kenwood KA-8100 $27
Current listings
See all on eBay →
Track this model
Get an email when the price drops below your target.
No spam. One email when the price hits your target. Unsubscribe anytime.