Kenwood KD-500 Value & Price History
As of 2026-09-21, a Kenwood KD-500 has a market value at around $114, parts units around $22. Based on 56 estimated sales.
Is a parts unit worth buying?
The $22 parts price is $303 less than the $325 working asking price — a 93% gap. Whether that gap covers the cost of repair depends on what's wrong.
What "for parts" usually means for a turntable: For belt-drive turntables, "for parts" often just means a dead or missing belt — a $12–15 fix. For direct-drive tables, it may mean a faulty tonearm, dead motor circuit, or seized bearing.
When it pencils out: Belt replacement costs $12–20 and takes 20 minutes. If that's all that's wrong, the $303 gap between parts and working price is pure profit for a buyer with basic skills. Direct-drive motor failures are a different story — they often aren't economical to repair.
When to walk away: A direct-drive table with a dead motor or failed quartz circuit is genuinely difficult to restore economically. A belt-drive with a seized main bearing or cracked plinth is similar. For any valuable table, confirm the seller knows what's wrong before buying.
DIY vs shop: Belt replacement and basic cartridge installation are straightforward DIY tasks. Tonearm bearing adjustment and motor service need more experience. Full repair cost context: what vintage stereo repair actually costs.
Price history
Asking median is down 3% over the last 45 days ($335 → $325).
View as table
| Date | Asking | Restored | Sold |
|---|---|---|---|
| 2026-08-08 | $335 | — | — |
| 2026-08-25 | $495 | — | — |
| 2026-08-30 | — | — | $100 |
| 2026-09-02 | $425 | — | $100 |
| 2026-09-05 | $375 | — | $100 |
| 2026-09-08 | $325 | — | $100 |
| 2026-09-11 | — | — | $97 |
| 2026-09-14 | — | — | $100 |
| 2026-09-17 | $325 | — | $114 |
| 2026-09-20 | $325 | — | $114 |
| 2026-09-21 | $325 | — | $114 |
Daily trimmed medians from qualifying eBay listings; days without a fresh sync are not plotted.
Specifications
| Years produced | 1977–1981 |
| Type | Turntable |
| Brand | Kenwood |
| Original MSRP | 300 (1977) |
| Inflation-adjusted | ~$1,500 today |
| Market value (sold) | $114 |
| Currently listed (asking) | $325 |
| Value vs MSRP | +8% |
Buying notes
Belt-drive Kenwood with an acrylic platter. Check the belt condition; original belts are degraded. The tonearm accepts standard headshells. Good build quality for the era; less collected than Technics so often underpriced.
Parts & supplies
Common maintenance items for the Kenwood KD-500. eBay links are model-specific searches; Amazon links are for generic supplies that work across most equipment.
- Kenwood KD-500 replacement stylus on eBay →
- Kenwood KD-500 replacement cartridge on eBay →
- Kenwood KD-500 drive belt on eBay →
- Kenwood KD-500 dust cover on eBay →
- Phono preamp — only needed if your amp or receiver has no phono input on Amazon →
- Cartridge alignment protractor on Amazon →
- Stylus tracking force gauge on Amazon →
- Anti-static record cleaning brush on Amazon →
Purchases through these links may earn StereoWorth a small commission at no extra cost to you. See our affiliate disclosure. Repair budgeting: what vintage stereo repair actually costs.
Comparable models
- Kenwood KD-650 $127
- Kenwood KD-750 $116
- Kenwood KD-990 $120
Current listings
See all on eBay →
Track this model
Get an email when the price drops below your target.
No spam. One email when the price hits your target. Unsubscribe anytime.