Rega Planar 3 Value & Price History
As of 2026-09-21, a Rega Planar 3 has a market value at around $750, parts units around $785. Based on 401 estimated sales.
Is a parts unit worth buying?
The $785 parts price is $64.99 less than the $849.99 working asking price — a 8% gap. Whether that gap covers the cost of repair depends on what's wrong.
What "for parts" usually means for a turntable: For belt-drive turntables, "for parts" often just means a dead or missing belt — a $12–15 fix. For direct-drive tables, it may mean a faulty tonearm, dead motor circuit, or seized bearing.
When it pencils out: Belt replacement costs $12–20 and takes 20 minutes. If that's all that's wrong, the $64.99 gap between parts and working price is pure profit for a buyer with basic skills. Direct-drive motor failures are a different story — they often aren't economical to repair.
When to walk away: A direct-drive table with a dead motor or failed quartz circuit is genuinely difficult to restore economically. A belt-drive with a seized main bearing or cracked plinth is similar. For any valuable table, confirm the seller knows what's wrong before buying.
DIY vs shop: Belt replacement and basic cartridge installation are straightforward DIY tasks. Tonearm bearing adjustment and motor service need more experience. Full repair cost context: what vintage stereo repair actually costs.
Price history
Asking median is up 12% over the last 45 days ($762 → $849.99).
View as table
| Date | Asking | Restored | Sold |
|---|---|---|---|
| 2026-08-08 | $762 | — | — |
| 2026-08-28 | $849.99 | — | — |
| 2026-08-31 | $788 | — | $785 |
| 2026-09-03 | $849.99 | — | $768 |
| 2026-09-06 | $850 | — | $750 |
| 2026-09-09 | $849.99 | — | $750 |
| 2026-09-12 | $849.99 | — | $750 |
| 2026-09-15 | $849.99 | — | $750 |
| 2026-09-18 | $849.99 | — | $750 |
| 2026-09-21 | $849.99 | — | $750 |
Daily trimmed medians from qualifying eBay listings; days without a fresh sync are not plotted.
Specifications
| Years produced | 1977–2016 |
| Type | Turntable |
| Brand | Rega |
| Original MSRP | 500 (1977) |
| Inflation-adjusted | ~$2,550 today |
| Market value (sold) | $750 |
| Currently listed (asking) | $849.99 |
| Value vs MSRP | +70% |
Buying notes
Long-production belt-drive with multiple generations (P3, Planar 3, Planar 3 2016). Identify which generation before buying; earlier versions accept different upgrade paths. Belt replacement is routine and cheap. Check the RB tonearm bearing for any vertical play. Good resale value across all generations.
Parts & supplies
Common maintenance items for the Rega Planar 3. eBay links are model-specific searches; Amazon links are for generic supplies that work across most equipment.
- Rega Planar 3 replacement stylus on eBay →
- Rega Planar 3 replacement cartridge on eBay →
- Rega Planar 3 drive belt on eBay →
- Rega Planar 3 dust cover on eBay →
- Phono preamp — only needed if your amp or receiver has no phono input on Amazon →
- Cartridge alignment protractor on Amazon →
- Stylus tracking force gauge on Amazon →
- Anti-static record cleaning brush on Amazon →
Purchases through these links may earn StereoWorth a small commission at no extra cost to you. See our affiliate disclosure. Repair budgeting: what vintage stereo repair actually costs.
Comparable models
- Rega P3 $852
- Rega P2 $850
- Rega Planar 2 $749
Current listings
See all on eBay →
Track this model
Get an email when the price drops below your target.
No spam. One email when the price hits your target. Unsubscribe anytime.