Sansui 1000A Value & Price History
As of 2026-09-21, a Sansui 1000A is currently listed at around $780; restored examples average $684, parts units around $577. Based on 2 active eBay listings (asking prices, not sold).
Is a parts unit worth buying?
The $577 parts price is $203 less than the $780 working asking price — a 26% gap. Whether that gap covers the cost of repair depends on what's wrong.
What "for parts" usually means for a receiver: Receivers listed "for parts" usually have a blown fuse, dead channel, scratchy controls, or failed capacitors. Cosmetic issues (missing knobs, cracked dial glass) also land units in this category.
When it pencils out: A full recap from a competent shop runs $250–450 for most receivers. Single-channel failures are often cheaper — a bad transistor or blown fuse might be $80–150 in labour. If the gap between the parts price and working price is $203 and recap costs are $300, you're roughly break-even on paper — only worth it if you enjoy the restoration process or the unit has sentimental value.
When to walk away: A receiver with a cracked transformer, missing output transistors with no replacements available, or major physical damage (water, fire, rodents) is genuinely for parts only. Check listing photos carefully for burnt boards or missing components.
DIY vs shop: Scratchy controls and dead dial lamps are DIY fixes — DeoxIT and a lamp kit cost under $30. Beyond that, receivers need a bench and test equipment. Full repair cost context: what vintage stereo repair actually costs.
Price history
Asking median is roughly flat over the last 45 days ($793 → $780).
View as table
| Date | Asking | Restored | Sold |
|---|---|---|---|
| 2026-08-08 | $793 | $888 | — |
| 2026-08-25 | $780 | $684 | — |
| 2026-08-28 | $780 | $684 | — |
| 2026-08-31 | $780 | $684 | — |
| 2026-09-03 | $780 | $684 | — |
| 2026-09-06 | $780 | $684 | — |
| 2026-09-09 | $780 | $684 | — |
| 2026-09-12 | $780 | $684 | — |
| 2026-09-15 | $780 | $684 | — |
| 2026-09-18 | $780 | $684 | — |
| 2026-09-21 | $780 | $684 | — |
Daily trimmed medians from qualifying eBay listings; days without a fresh sync are not plotted.
Specifications
| Years produced | 1965–1969 |
| Type | Receiver |
| Brand | Sansui |
| Original MSRP | 600 (1965) |
| Inflation-adjusted | ~$6,100 today |
| Currently listed (asking) | $780 |
| Restored value | $684 |
| Value vs MSRP | +30% |
Buying notes
Early Sansui tube receiver. Tube complement condition. FM front-end alignment needed. Check both channels and tuner sensitivity. Service requires tube expertise. Early Sansui tube equipment is undervalued relative to Fisher and Scott. Parts availability is more limited.
Parts & supplies
Common maintenance items for the Sansui 1000A. eBay links are model-specific searches; Amazon links are for generic supplies that work across most equipment.
- Sansui 1000A dial lamp kit on eBay →
- Sansui 1000A capacitor recap kit on eBay →
- Fuses for the Sansui 1000A on eBay →
- DeoxIT D5 — cleans oxidized contacts, quiets scratchy pots on Amazon →
- Multimeter — check DC offset before connecting speakers on Amazon →
- Speaker wire on Amazon →
Purchases through these links may earn StereoWorth a small commission at no extra cost to you. See our affiliate disclosure. Repair budgeting: what vintage stereo repair actually costs.
Comparable models
- Sansui Eight $17
- Sansui G-6000 $19
- Sansui 8080DB $29
Current listings
See all on eBay →
Track this model
Get an email when the price drops below your target.
No spam. One email when the price hits your target. Unsubscribe anytime.