Rega Turntable Value Guide (2026)
Rega is a British turntable manufacturer founded in 1973. Unlike the Japanese suspended-subchassis tables of the same era, Rega's design philosophy is a rigid, lightweight plinth with a low-mass tonearm. The Planar 3 has been in continuous production since 1977 and is one of the longest-running turntable designs in history. Used Rega tables hold value well because the company still services older models and replacement parts are available.
| Model | Spec | Working |
|---|---|---|
| Rega Planar 3 | — | $850 |
| Rega Planar 1 | — | thin market |
| Rega Planar 2 | — | thin market |
| Rega P3 | — | thin market |
| Rega P5 | — | thin market |
| Rega Brio-R | 50wpc | thin market |
| Rega Elex-R | 72wpc | thin market |
| Rega P1 | — | thin market |
| Rega P2 | — | thin market |
| Rega P6 | — | thin market |
| Rega P8 | — | thin market |
| Rega P10 | — | thin market |
| Rega Brio (2017) | — | thin market |
| Rega io | — | thin market |
The naming confusion: Planar 3 vs P3
Rega changed its naming convention in the mid-2000s. The original is the Planar 3 (1977-2000s). Rega then renamed it the P3, and has released several subsequent versions: P3-24, RP3, and the current Planar 3 (2016-present). Despite sharing the Planar 3 name, the 2016 Planar 3 is a substantially different table from the original: new plinth material, new RB330 tonearm, new motor. When buying used, verify exactly which version you're looking at.
The same naming pattern applies across the range: Planar 2/P2/RP2/Planar 2, and P5/RP6 etc. Each generation improved on the last but prices on the used market reflect this: older versions trade significantly lower than recent ones.
What each generation is worth
Original Planar 3s (1977-2000) with the RB300 tonearm list from $300 to $600 depending on condition and whether the stylus is usable. The RB300 is a well-regarded arm and upgradeable. P3-24 and RP3 versions (2006-2016) list from $400 to $800. The current Planar 3 (2016-present) retails at $745 new and sells used from $450 to $650.
The P5 is a step up from the P3 with a better platter and RB700 tonearm. Used P5s list from $600 to $1,000. The RP6 and current Planar 6 are above that tier.
Belt and bearing: what to check
Rega belts are inexpensive ($10-15) and need replacement every few years. Speed instability on a Rega is almost always the belt. Check that the platter spins at correct speed; most smartphones can measure turntable speed with a strobe app.
The main bearing on Rega tables is simple and durable but can develop rumble if run dry. A drop of light oil on the bearing spindle is routine maintenance. A unit making bearing noise at idle needs attention before use.
Rega tonearms (RB250, RB300, RB700) are highly regarded and a major part of the table's value. Inspect the arm tube for straightness and check that the bearings move freely without play. A bent or damaged arm tube is expensive to replace.
As an eBay Partner, StereoWorth may earn from qualifying purchases made through links on this page.